Detailed Product Description

LogBox-DA is an electronic data logger with two input channels, one analog and one digital. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets.
The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, multiplication factor, scale range, etc, are easily selected through the LogChart-II software.
The LogBox-DA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.

• Channel 1: NPN, PNP, Pulse or Dry Contact;
• Max. frequency: 4000 Hz or 20 Hz;
• Maximum counting: 65,535 per period;
• Channel 2: 0-20 mA, 4-20 mA, 0-50mV and 0-10 Vdc;
• Memory capacity: 32k or 64k readings;
• Interval between readings: 10 seconds to 18 hours;
• External battery switch time: 0 to 10 s;
• Power: Internal 3.6 V lithium battery (1/2 AA);
• Estimated autonomy: Over 2000 days (one daily download);
• Working temperature: From 40 °C to 70 °C;
• Protection: IP65, IP67 and IP68 models (see lateral label on product);
• Material: ABC + PC case, Polycarbonate film;
• Dimensions: 60 x 70 x 35 mm.